5
Adjustment > Dip Switch Function > Shifting Operation ON/OFF Setting in Staple Mode
Shifting Operation ON/OFF Setting in Staple Mode
You can determine whether paper is to be shifted in the staple mode.
With the host machine turned off, set the DIP switch (SW1) as follows:
• Shifting operation ON (Paper is shifted. Default)
In the staple mode, paper is delivered to the stack tray with it shifted.
ON
1
• Shifting operation OFF (Paper is not shifted.)
In the staple mode, paper is always delivered with it aligned at the front without being
shifted.
ON
1
5
Adjustment > Dip Switch Function > Shifting Operation ON/OFF Setting in Staple Mode
2 3 4
F-5-4
2 3 4
F-5-5
5-5
5-5