Setting Up The Cx3641Mfp From A Network Computer; Accessing Configure From A Network Computer - Oki CX3641 Setup Manual

S
ETTING UP THE
COMPUTER

Accessing Configure from a network computer

T
O ACCESS
T
O ACCESS
S CX3641MFP
ETTING UP THE
CX3641MFP
After you perform initial Setup from the copier/printer touch panel, you can change most
Setup options from a network computer using Configure. To use Configure from a
network computer, you must know the CX3641MFP Administrator password.
To set up the CX3641MFP from a network computer, use Configure. You can access
Configure in these ways:
• WebTools from a supported Internet browser
• Command WorkStation, Windows Edition
C
ONFIGURE FROM AN
1 Start your Internet browser and type the IP address of the CX3641MFP.
2 Click the Fiery button in the lower-left corner.
3 Click the Configure tab on the CX3641MFP home page.
4 Click Launch Configure.
5 Log on as Administrator with the appropriate password.
C
ONFIGURE FROM
1 Start Command WorkStation.
2 Log on as Administrator with the appropriate password.
3 Choose Setup from the Server menu.
Regardless of the method you use, the following dialog box appears.
FROM A NETWORK COMPUTER
FROM A NETWORK
I
NTERNET BROWSER
C W S
OMMAND ORK TATION
, W E
INDOWS DITION
20