Maintenance; Dust Removal; Preventive Maintenance; Customer Preventive Maintenance - 3D Systems ProX 800 User Manual

14

MAINTENANCE

CAUTION! If the equipment is used in a manner not specified by the manufacturer, the protection provided by
the equipment may be impaired .

DUST REMOVAL

Remove dust from the outer surfaces of the ProX 800 by wiping with a clean, dry, lint-free cloth.
CAUTION! Do not remove any outer panels when cleaning the system . Panels must be removed only by a
qualified 3D Systems Customer Support Representative.

PREVENTIVE MAINTENANCE

Your ProX 800 must have preventive maintenance performed by a qualified 3D Systems Customer Support Representative.
Contact 3D Systems to schedule this.
There is a charcoal filter at the top of the back side of the machine that will be replaced every six months during the preventive
maintenance performed by a qualified 3D Systems Customer Support Representative.

CUSTOMER PREVENTIVE MAINTENANCE

The following procedures can be performed by trained operators to maintain optimal printer functionality.

Cleaning the Print Applicator

Refer to the section, "Print Applicator Cleaning" on page
3D Systems, Inc.
49.
67