Machine Window - 3D Systems Viper Pro SLA User Manual

user's manual

Machine Window

Status
66
Status enables you to display the properties of the resin delivery
module (RDM), as well as the available laser power.
Resin: Displays the resin name.
Vat Size: Displays the build capacity of the RDM.
Temp: Displays the current vat temperature.
A: Displays the current air temperature.
Level: Shows the current resin level.
Power: Shows the maximum available laser power.
Laser: Displays if the laser is on or off.
LW Hrs: Displays the number of warrantee hours the laser has run.
Shutter: Displays status of the laser safety shutter (open/closed).
Note: These windows are not updated during a build. If
the laser is turned on or the shutter is opened by the
build process, the status shown may be incorrect.
Door Interlock: Displays if all door interlocks are closed.
ByPassKey Enable:
www.3dsystems.com
m a c h i n e w i n d o w
Displays if the interlock bypass key is active.
Software Overview
70696 Revision 1C 27-Aug-08