Toner Empty Rap; Toner Low Rap - Xerox WorkCentre M20 Service Manual

9.5 Toner Empty RAP

The machine has detected that the toner cartridge is empty.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
Refer to Wiring Diagram 1. Perform the following:
1. Install a new ELA - toner unit set, PL 9.10 Item 2.
2. If the message persists, check the PBA SUB - toner RX, PL 4.15 Item 23, and the PBA
SUB - toner TX, PL 8.25 Item 5.
3. If necessary, install a new PBA main, PL 1.10 Item 9.
Work Centre M20 Family

9.6 Toner Low RAP

The machine has detected that the toner cartridge is almost empty.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: If necessary, refer to GP 20 for the acronym list and cross reference lists of more com-
monly recognised part names.
1. The toner may be unevenly distributed. Remove the ELA - toner unit set and gently shake
it. If the message persists, install a new ELA - toner unit set, PL 9.10 Item 2.
March 2004
2-11
WARNING
Status Indicator RAPs
9.5, 9.6