Precautions Regarding Use Of Integrator Function - YOKOGAWA WT110 User Manual

7.4 Precautions Regarding Use of Integrator
Function
Relation between Integration Hold and the START/STOP key
Relation between Integration Reset and the START/STOP key
Integrated
value
Integration
preset time
START
IM 253401-01E
When the HOLD key is pressed, the display and communication output of the integrated results
is being held while integration continues. The relation between this hold function and the
START/STOP key is as follows.
• Even when starting integration while the hold function is on, the display and communication
output will remain unchanged. Only canceling the hold function or activating a trigger
(pressing the SHIFT key followed by the HOLD (TRIG) key) will result in displaying or
outputting the integrated results of the time of cancellation.
ON
HOLD
OFF
Displayed
value
(Dotted line shows integrated value)
Integration
preset time
START
• Even when stopping integration while the hold function is on, the displayed integrated value
will remain unchanged. However, as soon the hold function is turned off or a trigger is
activated, the integrated results of the time when integration was stopped will be displayed or
output.
ON
HOLD
OFF
ON
TRIG
Displayed
value
(Dotted line shows integrated value)
Integration
preset time
START
The relation between integration reset and the start/stop key is as follows.
Interrupt
Interrupt Restart
Start
STOP START STOP
STOP RESET
ON ON
STOP RESET
Reset
Restart
Preset time for integration
RESET START
7
Auto stop Reset
RESET
7-7