Store Group - YOKOGAWA WT110 User Manual

Appendix 2.3 Commands

2.3.14 STORe Group

The commands in the STORe group are used to make settings relating to and inquiries about storing data. This allows you to
make the same settings as when using the lower menus of [MEMORY]-"StorE" or [MEMORY]-"PnLSt".
;
:STORe : STAT e
INTer val
PANel
STORe?
Function Queries all settings related to storing data.
Syntax
STORe?
Example
STORE?→:STORE:STATE 0;INTERVAL 0,0,0
STORe:INTerval
Function Sets the interval for storage/queries the current setting.
Syntax
STORe:INTerval {<NRf>,<NRf>,<NRf>|<String>}
STORe:INTerval?
{<NRf>,<NRf>,<NRf>}=0,0,0 to 99,59,59
{<String>}=HH:MM:SS
Example
STORE:INTERVAL 0,0,0
STORE:INTERVAL "00:00:00"
STORE:INTERVAL?→:STORE:INTERVAL 0,0,0
Description • If the storage interval is set to 0,0,0, the storage
interval becomes 250ms in case of normal
measurement.
• For the storage interval in case of harmonic analysis,
refer to page 9-2.
STORe:PANel
Function Saves the set-up parameters to a file.
Syntax
STORe:PANel {<NRf>}
{<NRf>}=1 to 4:file number
Example
STORE:PANEL 1
STORe[:STATe]
Function Sets store ON/OFF, queries the current setting.
Syntax
STORe[:STATe] {<Boolean>}
STORe:STATe?
Example
STORE:STATE ON
STORE:STATE?→:STORE:STATE 1
App2-32
<Space> OFF
ON
<NRf>
?
<Space> <NRf> ,
<Character string>
?
<Space> <NRf>
?
HH hour MM min SS sec
<NRf> , <NRf>
IM 253401-01E