YOKOGAWA WT110 User Manual page 201

Appendix 2.7 Communication-related Error Messages
Errors in communications execution (200 to 299)
Code Message
221 Setting conflict
222 Data out of range
223 Too much data
224 Illegal parameter value
241 Hardware missing
260 Expression error
270 Macro error
272 Macro execution error
273 Illegal macro label
275 Macro definition too long
276 Macro recursion error
277 Macro redefinition not allowed
278 Macro header not found
Error in communication Query(400 to 499)
Code Message
410 Query INTERRUPTED
420 Query UNTERMINATED
430 Query DEADLOCKED
440 Query UNTERMINATED after
indefinite response
Errors in Execution (800 to 899)
Codes Message
813 to 819 Invalid operation
830 to 833 Internal memory access error
841 to 847 Integrator execute error
Error in System Operation (912)
Code Message
912 Fatal error in Communication driver Service is required.
Warnings (350, 390)
Code Message
350 Queue overflow
390 Overrun error
(only for RS-232C)
Note
App2-44
Action
Check the relevant setting.
Check the setting range.
Check the data byte length.
Check the setting range.
Check availability of options.
Equation is not allowed.
Does not conform to the macro definition specified in IEEE488.2.
Does not conform to the macro definition specified in IEEE488.2.
Does not conform to the macro definition specified in IEEE488.2.
Does not conform to the macro definition specified in IEEE488.2.
Does not conform to the macro function specified in IEEE488.2.
Does not conform to the macro definition specified in IEEE488.2.
Does not conform to the macro definition specified in IEEE488.2.
Action
Check transmission/reception order.
Check transmission/reception order.
Limit the length of the program message including <PMT> to
1024 bytes or less.
Do not enter any query after *IDN? and *OPT?.
Action
Refer to 14.4
Refer to 14.4
Refer to 14.4
Action
Action
Read out the queue.
Adjust the baud rate.
The warning code 350 only appears in case of an overflow of the error queue. The error which occurs in case
of clearing the STATus:ERRor? will not appear on the screen.
Reference Page
App.2.3
App.2.3
App.2.3
App.2.3
—
—
—
—
—
—
—
—
—
Reference Page
App2-3
App2-3
App2-4
—
Reference Page
14-11
14-11
14-11
Reference Page
—
Reference Page
App2-39
—
IM 253401-01E