1.3 Digital Numbers/Characters, and Initial Menus
• Integration Setting
1.
SHIFT
INTEG SET
• Turning the Harmonic Analysis Function ON/OFF
1.
SHIFT
HARMONICS
• Storing/Recalling to/from Internal Memory
1.
SHIFT
MEMORY
• Setting Output
1.
SHIFT
• Setting Communication Interface (GP-IB)
1.
SHIFT
INTERFACE
• Setting Communication Interface (RS-232-C)
1.
SHIFT
INTERFACE
1-6
( Display C )
RESET
2.
(Display C)
START
2.
( Display C )
STOP
2.
( Display C )
SETUP
2.
OUTPUT
( Display C )
LOCAL
2.
( Display C )
LOCAL
2.
(Setting integration mod)
(Setting integration timer)
(Setting integration preset time)
(Setting the element)
(Setting PLL source)
(Setting computation methood
of harmonic distortion)
(Storing measurement data)
(Recalling measurement data)
(Storing set-up parameters)
(Recalling set-up parameters)
(Setting comm./plotter/printer output)
(Execute plotter/printer output)
(Setting D/A output)
(Comparator setting:relay output setting)
(Setting addressable mode A)
(Setting addressable mode B)
(Setting talk-only mode)
(Print mode setting:setting plotter/printer output)
(Setting communication commands according to IEEE 488.2-1987)
(Setting normal mode)
(Setting talk-only mode)
(Print mode setting:setting plotter/printer output)
(Setting communication commands according to IEEE 488.2-1987)
IM 253401-01E