YOKOGAWA WT110 User Manual page 166

Command
INTEGrate Group
:INTEGrate?
:INTEGrate:MODE
:INTEGrate:RESet
:INTEGrate:STARt
:INTEGrate:STOP
:INTEGrate:TIMer
MATH Group (applies to WT110/WT130 with ROM version 2.01 or later)
:MATH?
:MATH:ARIThmetic
:MATH:CFACtor
:MATH:TYPE
MEASure Group
:MEASure?
:MEASure:HARMonics?
:MEASure:HARMonics:ITEM?
:MEASure:HARMonics:ITEM:PRESet
:MEASure:HARMonics:ITEM:{SYNChronize|<harmonic analysis function>}
:MEASure:HARMonics:VALue?
:MEASure:NORMal?
:MEASure[:NORMal]:ITEM?
:MEASure[:NORMal]:ITEM:PRESet
:MEASure[:NORMal]:ITEM:{TIME|MATH}
:MEASure[:NORMal]:ITEM:<normal measurement function>?
:MEASure[:NORMal]:ITEM:<normal measurement function>[:ALL]
:MEASure[:NORMal]:ITEM:<normal measurement function>:ELEMent<x>
:MEASure[:NORMal]:ITEM:<normal measurement function>:SIGMA
:MEASure[:NORMal]:VALue?
RECall Group
:RECall?
:RECall:INTerval
:RECall:PANel
:RECall[:STATe]
IM 253401-01E
Description
Queries all settings related to integration.
Sets/queries the integration mode.
Resets the integration values.
Starts integration.
Stops integration.
Sets/queries the integration timer.
Queries all settings related to the computing function.
Sets/queries the computing equation of the four arithmetic operations.
Sets/queries the computing equation of the crest factor.
Sets/queries the computing equation.
Queries all settings related to measurement/computation data.
Queries all settings related to harmonic analysis data.
Queries all settings related to the output items of harmonic analysis data.
Sets the ON/OFF pattern for all communication outputs of the harmonic
analysis function.
Sets/queries the communication output item of harmonic analysis ON/OFF.
Queries harmonic analysis data set by commands other than
"MEASure:HARMonics:ITEM".
Queries all settings related to normal measured/computed data.
Queries all settings related to the output items of normal measured/computed data. App. 2-23
Sets the ON/OFF pattern for all communication outputs of the normal
measurement function.
Sets/queries the ON/OFF state of the communication output of
{integration time|MATH} .
Queries communication output settings of the normal measurement function.
Sets the communication output items concerning all elements or S ON/
OFF at once.
Sets/queries the communication output items concerning each element
ON/OFF.
Sets/queries the communication output items concerning S ON/OFF.
Queries normal measured/computed data set by commands other than
"MEASure[:NORMal]:ITEM"
Queries all settings related to recalling data.
Sets/queries the recalling interval.
Retrieves the set-up parameters file.
Sets/queries recalling ON/OFF.
Appendix 2.3 Commands
Page
App. 2-19
App. 2-19
App. 2-19
App. 2-19
App. 2-19
App. 2-19
App. 2-20
App. 2-20
App. 2-20
App. 2-20
App. 2-22
App. 2-22
App. 2-22
App. 2-22
App. 2-22
App. 2-22
App. 2-22
App. 2-23
App. 2-23
App. 2-23
App. 2-23
App. 2-23
App. 2-23
App. 2-23
App. 2-27
App. 2-27
App. 2-27
App. 2-27
App2-9
App