Recall Group - YOKOGAWA WT110 User Manual

2.3.10 RECall Group

The commands in the RECall group are used to make settings relating to, and inquires about recalling data. This allows you to
make the same settings and inquiries as can be set using the lower menus of [MEMORY]-"rECAL" or [MEMORY]-"PnLrC".
;
:RECall : STAT e
INTer val
PANel
RECall?
Function Queries all the settings relating to recalling data.
Syntax
RECall?
Example
RECALL?→:RECALL:STATE 0;INTERVAL 0,0,0
RECall:INTerval
Function Sets the recalling interval/queries the current setting.
Syntax
RECall:INTerval {<NRf>,<NRf>,<NRf>|<String>}
RECall:INTerval?
{<NRf>,<NRf>,<NRf>}=0,0,0 to 99,59,59
{<String>}=HH:MM:SS
seconds
Example
RECALL:INTERVAL 0,0,0
RECALL:INTERVAL "00:00:00"
RECALL:INTERVAL?→:RECALL:INTERVAL 0,0,0
Description Even when the interval has been set to 0,0,0, the
interval becomes 250ms in case of normal
measurement and 1s in case of harmonic analysis.
RECall:PANel
Function Retrieves the set-up parameters file.
Syntax
RECall:PANel {<NRf>}
{<NRf>}=1 to 4 : file number
Example
RECALL:PANEL 1
RECall[:STATe]
Function Turns recalling ON/OFF, queries the current setting.
Syntax
RECall[:STATe] {<Boolean>}
RECall:STATe?
Example
RECALL:STATE ON
RECALL:STATE?→:RECALL:STATE 1
IM 253401-01E
<Space> OFF
ON
<NRf>
?
<Space> <NRf> ,
<Character string>
?
<Space> <NRf>
?
HH hour MM minutes SS
Appendix 2.3 Commands
<NRf> , <NRf>
App
App2-27