Display Group - YOKOGAWA WT110 User Manual

2.3.5

DISPlay Group

The commands in the DISPlay group are used to make settings relating to, and inquiries about display. This allows you to make
the same settings and queries as when using the FUNCTION key or ELEMENT key on the front panel.
:DISPlay <x>
DISPlay<x>?
Function Queries all the display settings.
Syntax
DISPlay<x>?
<x>= 1 to 3
1:Display A
2:Display B
3:Display C
Example
DISPlay1?→:DISPLAY1:MODE VALUE;FUNCTION
V;ELEMENT 1
DISPlay<x>:ELEMent
Function Sets the element to be displayed/queries the current
setting.
Syntax
DISPlay<x>:ELEMent {<NRf>|SIGMa}
DISPlay<x>:ELEMent?
<x>= 1 to 3
1:Display A
2:Display B
3:Display C
{<NRf>}=1 (WT110 single-phase model)
1, 3 (WT130 three-phase, three-wire
model)
1 to 3 (WT130 three-phase, four-wire
model)
Example
DISPLAY1:ELEMENT 1
DISPLAY1:ELEMENT?→:DISPLAY1:ELEMENT 1
DISPlay<x>:FUNCtion
Function Sets the function to be displayed/queries the current
setting.
Syntax
DISPlay<x>:FUNCtion {<display function>}
DISPlay<x>:FUNCtion?
<x>= 1 to 3
1:Display A
2:Display B
3:Display C
in case of normal measurement
<display function>=
{V|A|W|VA|VAR|PF|DEGRee|
VHZ|AHZ|WH|WHP|WHM|AH|AHP|AHM|MATH|VPK|APK|
TIME}
in case of harmonic analysis
<display function>= {V|A|W|PF|VHZ|AHZ|VTHD|
ATHD|VCON|ACON|WCON|VDEG|ADEG|ORDer}
Example
DISPLAY1:FUNCTION V
DISPLAY1:FUNCTION?→:DISPLAY1:FUNCTION V
Description For the meanings of the symbols of functions, see
Note on page App2-11.
IM 253401-01E
;
: MODE <Space>
FUNCtion <Space>
ELEMent <Space>
DISPlay<x>:MODE
Function
Syntax
Example
Description
Appendix 2.3 Commands
VALue
RANGe
ESCaling
?
<Display function>
?
<NRf>
SIGMa
?
?
Sets the contents of the display/queries the current
setting.
DISPlay<x>:MODE {VALue|RANGe|ESCaling}
DISPlay<x>:MODE?
<x>= 1 to 3
1:Display A
2:Display B
3:Display C
VALue: displays measurement data
RANGe: displays the present range of voltage
and current, or the scaling values of the
external sensor of element 1.
ESCaling: displays the scaling values of the
current external sensor
DISPLAY1:MODE VALUE
DISPLAY1:MODE?→:DISPLAY1:MODE VALUE
<x> will be ignored. The contents of all the displays 1
to 3 will be received.
App
App2-17