YOKOGAWA WT110 User Manual page 110

11.4 Output Format for Normal Measured/Computed Data, Harmonic Analysis Data, Set-up Parameters and Error Codes
Output Format of Set-up Parameters and Error Codes
11-8
Output Format
The output format depends on the selected output items which can be selected by the "OH"
command.
In case of voltage and current
All computed values of
Line 1
the 1st to 50th order
Analysis value for
Line 2
fundamental (1st order)
Analysis value for 2nd
Line 3
harmonic
Analysis value for 50th
Line 51
harmonic
Line 52
END Terminator
In case of active power
All computed values of
Line 1
the 1st to 50th order
Analysis value for
Line 2
fundamental (1st order)
Analysis value for
Line 3
2nd harmonic
Line 51 Analysis value for
50th harmonic
Line 52
END Terminator
In case of phase angle
Phase angle between
Line 1
fundamentals
of voltage and current
Line 2
Phase angle between
fundamental and 2nd
harmonic of voltage
Line 3
Phase angle between
fundamental and
3rd harmonic of voltage
Line 50
Phase angle between
Line 51
fundamental and
50th harmonic of voltage
Terminator
END
In case of ALL setting
The data will be output in the sequence voltage → current → active power → phase angle →
END <terminator>
- The output format of each item is as described for each item above;
- The END line is not output for each item, but after finishing the entire output operation.
Refer to the explanations and examples of the "OS" or the "OE" commands described in
Appendix 1.1.
,
harmonic distortion
Frequency
,
Relative harmonic content
,
for 2nd harmonic
Relative harmonic content
,
for 50th harmonic
, Power factor
, Frequency
Relative harmonic content
,
for 2nd harmonic
Relative harmonic content
,
for 50th harmonic
, Frequency
Phase angle between
fundamental and
,
2nd harmonic of current
Phase angle between
fundamental and
,
3rd harmonic of current
Phase angle between
fundamental and
,
50th harmonic of current
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
Terminator
IM 253401-01E