Table of Contents
Advertisement
REV.-A
WARNING
When turning the adjusting pin for the head slant adjustment, be sure to first loosen the
printhead fixing screw to float the printhead. If you try to turn the pin forcibly, the screw head
might break.
B
Load the paper.
{
\ \ \
0
\ \ \
------------
Press the
\ \ \
ON LINE switch.
{
I I I
®
I I I
------------
Select the pattern,
<?
I I I
b(OK), a, or c(NG),
whitch best
{
I I I
categorizes the
printing.
8
I I I
------------
I I I
08
RETURN
Move the printing to the center of the platen,
and loosen the head fixing screw (see Figure 4-5).
Turn the adjusting pin, and make the printhead as it was.
When the printing is categorized as pattern a:
Turn the adjusting pin clockwise.
When the printing is categorized as pattern c:
Turn the adjusting pin counter clockwise.
Adjust the platen gap (see Section 4.3.4)
~
I
Figure 4-67. Head Slant Adjustment
4-55
Advertisement
Table of Contents
