Table of Contents
Advertisement
REV.-A
4.2.3 Tractor Unit Removal
The tractor unit must be removed before removing the various other units.
Step 1 Remove the upper case. (See Section 4.2.2.1)
Step 2 Remove the two CB(N)S screws (M3 X 6) at the left and right, which secure the tractor unit.
Step 3 Pull the tractor unit backward.
CB(N) 8(M3
x
6)
Tractor Unit
Figure 4-11. Tractor Unit Removal
ASSEMBLY POINT:
•
When reattaching the tractor unit, match the unit and the guide pin, and tighten the screw while
pushing the unit frontward.
4-15
Advertisement
Table of Contents
