REV.-A
3.3.2 CSF Software Control
This cut sheet feeder is driven by the firmware incorporated into the printer and need not be
electronically connected to it. It also contains two bins so that two different sizes of paper can be
handled.
The panel setup or control command (ESC EM) can be used to select a bin and specify the cut sheet
feeder mode.
Command: ESC EM
Format:
Where:
LPRINT CHR$(27);CHR$(25);
"n"
n
=
0
Cancels the CSF mode
n
=
1
Specifies bin 1
n
=
2
Specifies bin 2
n
=
4
Specifies the CSF mode
n
=
R
Ejects a sheet
NOTE: This command should be input when paper is loaded.
3-8