Table of Contents
Advertisement
REV.-A
3.3 CUT SHEET FEEDER
The SO can use the double-bin and single-bin cut sheet feeders.
Total 4 types (both 80-column and 136-column models for double and single bin CSFs) are available.
The difference between 80-column and 136-column model is only line length.
The cut sheet feeder has the following features:
•
Can handle cut sheets and envelopes in the same manner as fanfold paper.
•
Can use fanfold paper without dismounting the cut sheet feeder.
•
Has two bins so that two types sheet can be used. (Double-bin type)
•
Allows user to load a sheet by manual insertion.
•
Is easy to change the stacker either to bin 1 or bin2 by the control panel operation. (Double-bin type)
•
Requires no electrical connection to and from the printer.
•
Is easy to mount onto or dismount from the printer.
•
Is high cost performance.
Figure 3-1. SQ-2550 with Double-bin CSF
Figure 3-2. SQ-850 with Single-bin CSF
3-4
Advertisement
Table of Contents
