REV.-A
(1) Pump motor set removal
Step 1 Remove the two CB screws (M2.6 X 5) securing the pump motor to the P frame, then remove
the pump motor set.
P Frame
Pump motor
"':.--_--- CB (M2.6 X 5)
Figure 4-31. Pump Motor Set Removal
ASSEMBLY POINTS:
•
Install the pump motor so that the label side faces down, and apply abhesive to the two screws
securing the pump motor. (See Chapter 6)
•
After installing the pump motor set, lubricate the point at which where the pump motor pinion, pump
transmission gear, and pump drive gear engage one another.
4-29