Table of Contents
Advertisement
REV.-A
3.3.4.1 Side Cover Removal
[Step 1]
[Step 2]
Remove the three stacker supports, four hopper fittings, three stacke fittings, and two
paper supports from the CSF.
Remove side covers Land R from side frames Land R. (Side cover L (R) is fixed to side
frame L (R) with the seven tabs.)
Tab
Figure 3-7. Side Cover Removal
3.3.4.2 Hopper Unit Removal
[Step 1]
[Step 2]
[Step 3]
[Step 4]
Remove the side covers.
Remove the projecting portion of paper support shaft holder L from the hole in side frame
L, then rotate shaft holder L 90° so that the projecting portion faces up. Do the same
thing for shaft holder
R.
Remove the E ring at the left of the paper loading roller shaft, then slide the paper loading
roller shaft to the right to remove the shaft holder from side frame L.
Remove the shaft holder at the right of the paper loading roller shaft from side frame
R, then remove the whole hopper unit. The double-bin CSF hoper unit can be removed
in the same way as for the single-bin CSF.
Side frame (L)
Shaft holders (R)
Figure 3-8. Hopper Unit Removal
3-11
Advertisement
Table of Contents
