Table of Contents
Advertisement
REV.-A
•
Capping
•
Attaching the protective parts and packing
Attach the protective parts, and pack the printer in the specified package as shown in Figure 4-1.
Notice
Sheet
1~"7""d---+-------=- Transportation
Locking Bracket
Figure
4-1.
Attaching the Protective Parts
The above described procedures are arranged as a repair process in Table 4-2 below. Use this table
as a check list when performing repairs.
Table
4-2.
Repair Process
Procedure
Process
Contents
Cartridge to
Operation
be used
Protect the printhead from
Turn the printer power
1
Capping
-
being damaged.
on/off.
Remove the remaining ink
Draining
Cleaning
2
Ink draining
from the ink path.
cartridge
(two times);
3
Repair
-
-
-
Check the results of the
Self test
4
Self test
Ink cartridge
repair.
Drain the ink used in the self
Draining
Cleaning
5
Ink draining
test.
cartridge
(two times)
6
Ink path
Clean the ink path with the
Cleaning
Cleaning
cleaning
special cleaning liquid.
cartridge
(once)
Draining the
Draining the remaining clean-
Draining
Cleaning
7
cleaning
ing liquid.
cartridge
(three times)
8
Protect the printhead from
Turn the printer power
Capping
-
being damaged.
on/off.
9
Attach the protective parts
Packing
-
for transportation.
4-4
Advertisement
Table of Contents
