Table of Contents
Advertisement
REV.-A
4.2.6.15 TE Motor Removal
Step 1 Remove the carriage unit. (See Section 4.2.6.3)
Step 2 Remove the platen unit. (See Section 4.2.6.11)
Step 3 Remove the (lower) paper guide. (See Section 4.2.6.11)
Step 4 Remove the paper bail. (See Section 4.2.6.1)
Step 5 Remove the two screws (+S tight up set hexagonal (M3 X 6)) securing the paper guide plate,
then remove the paper guide plate set.
Screws
Paper guide plate set
Figure 4-53. Paper Guide Plate Set Removal
Step 6 Remove the two CCS screws (M3 X 8) securing the support frame, then remove the support
frame.
Figure 4-54. Support Frame Removal
4-43
Advertisement
Table of Contents
