Table of Contents
Advertisement
REV.-A
Step 7
Step 8
Step 9
Remove the TE motor lead wire from the wire clip.
Remove the two CCS screws (M3 X 8) securing frame M by inserting a screwdriver through
the holes (two) in frame L.
Remove frame M from the cutout in the base frame while tilting frame M.
Wire clip
Frame L
Holes
Figure 4-55. Frame M Removal
Step 1OUnlock the three bent tabs of the TE motor cover, then remove the TE motor cover from frame
M.
Tabs -=------"-Cc+
Tabs
- - - - - - TE motor cover
Figure 4-56. TE Motor Cover Removal
4-44
Advertisement
Table of Contents
