Mute A Call; Mute While Dialing - Yealink SIP-T46G User Manual

Mute a Call

To mute a call:
Press during an active call.
1.
The mute key LED illuminates solid red. The LCD screen indicates that the call is now muted.
To un-mute a call:
Press again to un-mute the call.
1.
The mute key LED goes out.

Mute While Dialing

To mute the microphone while dialing:
Press on the pre-dialing, dialing or calling screen.
1.
The mute key LED illuminates solid red. The call is muted automatically when setting up
successfully.
To un-mute the microphone while dialing:
Press again on the pre-dialing, dialing or calling screen.
1.
Note You can also mute the microphone when the IP phone is ringing.
Keep Mute
If keep mute is enabled, you can mute the microphone on any screen. The phone stays in the
mute state until you un-mute the microphone or until the phone restarts. This feature should be
pre-configured by your system administrator.
To mute the microphone on any screen:
Press on any screen (for example, ringing, dialing, talking or idle).
1.
Vantact.com 2010-2018
Page 37
36