Read First; Check The Product; Contents Of The Product Code - Toshiba TOSVERT VF-PS1 Instruction Manual

1. Read first

1.1

Check the product

Before using the product you have purchased, check to make sure that it is exactly what you ordered.
Use an inverter that conforms to the specifications of the power supply and three-phase induction
motor being used. If the inverter being used does not conform to those specifications, not only will
Mandatory the three-phase induction motor not rotate correctly, but it may cause serious accidents through
overheating and fire.
Type indication
3PH-200/240V
VF-PS1
Series name
Power supply
Motor capacity
Carton box
Type indication
label
Instruction manual
This manual
1. 2

Contents of the product code

Explanation of the type and form written on the label.
Type
V F P S 1 - 2 0 3 7 P L Y - W N - A 2 2
Model name Voltage class
TOSVERT 2: 200V~240V
VF-PS1 series
4: 380V~480V
*1): This code represents the factory default logic setting. You can switch from one input/output logic to the other
using slide switch SW1.  For more details, refer to Section 2.3.2.
Inverter main unit
3.7kW/5HP
Type indication
Warning label
Form
Applicable motor capacity Operation panel
004:0.4kW 450:45kW P: Provided
007:0.75kW 550:55kW
015:1.5kW 750:75kW
022:2.2kW 900:90kW
037:3.7kW 110K:110kW
055:5.5kW 132K:132kW
075:7.5kW 160K:160kW
110:11kW 220K:220kW
150:15kW 250K:250kW
185:18.5kW 280K:280kW
220:22kW 315K:315kW
300:30kW 400K:400kW
370:37kW 500K:500kW
630K:630kW
Caution
Name plate
Warning label
DANGER
Risk of injury, electric shock or fire.
・ Read the Instruction Manual.
・ Do not open the cover while power is applied or
for 15 minutes after power has been removed.
・ Ensure proper earth connection.
Additional functions I
Additional functions II
L: Built-in EMC filter
Y: Others
+
basic filter
M: Built-in basic filter
C: Built-in EMC filter
A-1
E6581386
Name plate
Inverter Type
Applicable motor
Invert rated output capacity
Power supply
Related input current
Related output current
Serial No.
Special specification code
Special
specification code
A: Special
(non-standard)
specification code
(is a number)
Default interface
logic (*1)
WN: Negative
WP: Positive
1