Optional Internal Devices - Toshiba TOSVERT VF-PS1 Instruction Manual

Optional internal devices

10.5
Here are the internal devices optionally available. There are two types of optional devices: Add-on type and Plug-in
type.
 Table of optional devices
(1) Expansion I/O card1
(Logic input/output + PTC input)
(2) Expansion I/O card2
(Function of the above optional card 1
+ Analogue input/output + Pulse input)
(3) CC-Link communication card
(4) DeviceNet communication card
(5) PROFIBUS-DP communication card
(6) L
ON
(7) BAC net communication card
(8) Metasys N2 communication card
(9) APOGEE FLN communication card
(10) Modbus TCP communication card
(11) Modbus Plus communication card
(12) PG feedback option
(Push-pull 12V)
(13) PG feedback option
(Push-pull 15V)
(14) PG feedback option
(Push-pull 24V)
(15) PG feedback option
(RS422-5V)
10
 Functions of Add-on type options
(1) Expansion I/O card1 (Logic input/output + PTC input)
Function
Multifunction programmable contact
input (4 points)
Multifunction programmable open
collector output (2 points)
Multifunction programmable relay
contact output
External thermal trip input
24V power output
-10V power output
Contact input common terminal
Option name
W communication card
ORKS
No-voltage contact input (24Vdc-5mA or less)
Sink logic input (at a common voltage of 24V)
ON: Less than 10Vdc
OFF: 16Vdc or more
Driving current: Max. 50mA when an external power source is used
Driving voltage: 12V (min) to 30V (max)
1C contact configuration
250Vac-2A (cos=1), 250Vac-1A (cos=0.4), 30Vdc-1A
Resistance between TH+ and TH-
Error: Approx. 70Ω or less or approx. 3kΩ or more
Recovery from error: Approx. 1.6kΩ
24Vdc - 60mA max
-10Vdc -10mA
Common terminals for contact input
Function, purpose
Used to extend input and output
terminals.
Used to connect to a CC-Link
network for control.
Used to connect to a DeviceNet
network for control.
Used to connect to a
PROFIBUS-DP network for control.
Used to connect to a L W
ON ORKS
network for control.
Used to connect to a BAC net
network for control.
Used to connect to a Metasys N2
network for control.
Used to connect to a APOGEE FLN
network for control.
Used to connect to a Modbus TCP
network for control.
Used to connect to a Modbus Plus
network for control.
Used to issue motor pulse train rate
commands or used for sensor
vector control.
Description
Max. 20mA when the internal power source is used
J-8
E6581386
Type of
Model
installation
ETB003Z Add-on
ETB004Z Add-on
CCL001Z Add-on
DEV002Z Add-on
PDP002Z Add-on
LIU006Z Add-on
BCN001Z Add-on
MTS001Z Add-on
APG001Z Add-on
MBE001Z Add-on
MBP001Z Add-on
VEC004Z Plug-in
VEC005Z Plug-in
VEC006Z Plug-in
VEC007Z Plug-in
Source logic input
ON: 11Vdc or more
OFF: Less than 5Vdc