Toshiba TOSVERT VF-PS1 Instruction Manual page 254

2. Basic parameter [4/4]
Communi
Title cation Function
No.
0308 Dynamic braking resistance

0309 Dynamic braking resistor capacity

 0007 Factory default setting
Registered parameter display
 0050
selection

~ - Extended parameters

 - Automatic edit function
*1: If  is set to , the optional communication devices DEV002Z, PDP002Z, MTS001Z, APG001Z, LIU006Z, BCN001Z, IPE001Z and CCL001Z cannot be used with the inverter. (The
personal computer communications software PCM001Z cannot be used, either.) Furthermore, the copy function of the LED extended panel option (RKP002Z) does not work normally, so use
only the parameter setting function and the monitoring function.
*2: Default values vary depending on the capacity.  See the table of K-42.
Adjustment range
0.5~1000Ω
0.01~600.0kW
0: -
1:50 Hz default setting
2:60 Hz default setting
3:Factory default setting
4:Trip clear
5:Cumulative operation time cleared
6:Initialization of type information
7:Save user-defined parameters
8:Reset of user-defined parameters
9:Cumulative fan operation time record clear
10:Acceleration/deceleration time setting 0.01
sec.~600.0 sec. *1
11:Acceleration/deceleration time setting 0.1
sec.~6000sec.
0:Standard setting mode at turn on the power
1:Quick mode at turn on the power
2:Quick mode only
Set detailed parameters shown in the following pages.
-
Sensorless vector/PG feedback control (●:Effective, -:Ineffective)
Minimum
setting unit Default Write during Vector
(Panel/Communi setting running control
cation)
0.1/0.1 *2 Disabled ●/●
0.01/0.01 *2 Disabled ●/●
1/1 0 Disabled ●/●
1/1 0 Enabled ●/●
- - - ●/●
- - ●/●
PM
V/f Reference
control
● ● 5. 19
● ● 5. 19
● ● 5. 20
● ● 5. 22
● ● -
● ● 4. 2