1.3.4 Installing the DC reactor
How to install (Example: VFPS1-4220KPC)
(1)
1
Front cover
Remove the front cover.
(3)
Connect the reactor unit to the PO
and PA/+ terminals on the main-circuit
terminal board. Then connect the
supplied earth wire.
See the figures on the next page.
Fix the front cover after connecting.
接続語
(2)
Reactor unit
Mount the reactor case on an inner wall
of the cabinet and secure the reactor unit
to the case with screws.
(4)
Top panel
Cover
Front panel
Secure the cover, front panel and top panel
to the reactor case with screws.
A-16
E6581386
Reactor case