Toshiba TOSVERT VF-PS1 Instruction Manual page 160

[Parameter setting]
Title



Note: The minimum setting of acceleration and deceleration times have been set respectively at 0.1 sec. by default,
but they can be changed within a range of 0.01 sec. (setting range:0.01~600.0 sec.) by changing the setting
of the parameter  (default setting).
1) Selection using parameters
Output frequency [Hz]
=
=
Acceleration/deceleration time 1 is initially set as the default. Acceleration/deceleration time 2 can be selected by
6
changing the setting of the .
Enabled if = (operation panel input enabled).
2) Switching by frequencies - Automatically switching acc/dec times at certain frequencies
Title

Function
Acceleration time 2
Deceleration time 2
Panel acceleration/deceleration selection

0


Function
Acceleration/deceleration switching frequency
Output frequency
[Hz]
Set frequency


0
(1) (2)
(1) Acceleration at the gradient corresponding
to acceleration time 
(2) Acceleration at the gradient corresponding
to acceleration time 
Adjustment range
[Note]~ sec.
[Note]~ sec.
: Acceleration/deceleration 1
: Acceleration/deceleration 2
 For details, refer to Section 5.20.


Adjustment range
~ Hz
(3) (4)
(3) Deceleration at the gradient corresponding
to deceleration time 
(4) Deceleration at the gradient corresponding
to deceleration time 
F-44
E6581386
Default setting
According to model
According to model

Time [s]
Time [s]
Default setting

Time [s]