Getting Started With "Parameterize Fm - Siemens SIMATIC FM 353 Manual

Defining Parameters
5.2

Getting started with "Parameterize FM 353"

Prerequisites
You have installed the software on your programming device/PC, as described in
Section 5.1.
Configuration
Before you can configure your system, you must create a project in which to save
the parameters. You will find further information on how to configure modules in
your user manual Standard Software for S7 and M7, STEP 7. The description be-
low outlines only the most important steps.
1. Start the SIMATIC Manager and open your project.
2. Insert a SIMATIC 300 station in the menu Insert > Station.
3. Select the SIMATIC 300 station. Call up the S7 hardware configuration from
the menu Edit > Open Object.
4. Select a rack.
5. Select the FM 353 positioning module with the correct order number from the
module catalog, and insert it in the hardware table as appropriate for your con-
figuration.
6. Double-click a module to configure it.
The Properties dialog box appears.
Fig. 5-2
5-4
Getting started with "Parameterize FM 353"
FM 353 Stepper Drive Positioning Module
6ES7 353-1AH01-8BG0