Mixed Control - Kubota MX5100 Workshop Manual

MX5100, WSM

[4] MIXED CONTROL

Mixed control is a system combining position control
with draft control.
When traction load increases, the draft control
functions to raise the lift arms (implement).
traction load decreases, the lift arms (implement) lower
to the height set by the position control lever.
With the position control only when traction load
increases, slippage or engine stop may occur unless the
implement is raise.
With the draft control only, plowing depth cannot be
kept constant if soil hardness changes greatly.
The mixed control serves to eliminate such
disadvantages.
A : Position Controlled
B : Draft Controlled
C : Not Deep Even in Soft Soil
8-M13
HYDRAULIC SYSTEM
When
D : Shallow where Resistance
Occur
W10165370