Kubota MX5100 Workshop Manual page 121

MX5100, WSM
Disconnecting Wirings 3
1. After removing the floor seat cover, disconnect the code bands
(1) (2) (3) (6).
2. Disconnect the wiring from the transmission housing case.
(When reassembling)
• Bind the code bands as shown in the pictures.
• Reinstall the wirings to the original location as shown in the
picture.
(1) Code Band
(2) Code Band
(3) Code Band
1-S29
ENGINE
(4) Wiring
(5) Hydraulic Cylinder Safety Valve
(6) Code Band
W11227490