Kubota MX5100 Workshop Manual page 106

MX5100, WSM
[ENGINE BODY]
Item
Cylinder head cover screw
*Cylinder head screw
*Main bearing case screw 1
*Main bearing case screw 2
*Flywheel screw
*Connecting rod screw
*Rocker arm bracket screw
?*Idle gear shaft screw
Fan drive pulley mounting nut
*Bearing case cover mounting screw
Glow plug
Nozzle holder assembly
Oil pressure switch
Injection pipe retaining nut
Overflow pipe assembly retaining nut
Camshaft set screw
Hi-idling body
Balancer shaft set bolt
NOTE
• For "*" marked screws, bolts and nuts on the table, apply engine oil to their threads and seats before
tightening.
• The letter "M" in Size x Pitch means that the screw, bolt or nut dimension stands for metric. The size is
the nominal outside diameter in mm of the threads. The pitch is the nominal distance in mm between two
threads.
Size x Pitch N·m
M6 x 1.0 9.81 to 11.2
M11 x 1.25 93.2 to 98.0
M9 x 1.25 46 to 50
M10 x 1.25 69 to 73
M12 x 1.25 98.1 to 107
M8 x 1.0 45 to 49
M8 x 1.25 24 to 27
M8 x 1.25 24 to 27
M30 x 1.5 138 to 156
M8 x 1.25 24 to 27
M10 x 1.25 20 to 24
M20 x 1.5 49 to 68
R 1/8 15 to 19
M12 x 1.5 25 to 34
M12 x 1.5 20 to 24
M8 x 1.25 24 to 27
M14 x 1.0 45 to 49
M8 x 1.25 24 to 27
1-S14
ENGINE
kgf·m lbf·ft
1.00 to 1.15 7.24 to 8.31
9.50 to 10.0 68.8 to 72.3
4.7 to 5.2 34 to 37
7.0 to 7.5 51 to 54
10.0 to 11.0 72.4 to 79.5
4.5 to 5.0 33 to 36
2.4 to 2.8 18 to 20
2.4 to 2.8 18 to 20
14.0 to 16.0 102 to 115
2.4 to 2.8 18 to 20
2.0 to 2.5 15 to 18
5.0 to 7.0 37 to 50
1.5 to 2.0 11 to 14
2.5 to 3.5 18 to 25
2.0 to 2.5 15 to 18
2.4 to 2.8 18 to 20
4.5 to 5.0 33 to 36
2.4 to 2.8 18 to 20
W1013236