Kubota MX5100 Workshop Manual page 449

MX5100, WSM
Bearing on Drive End Side
1. Press out the bearing from drive end frame (3) with a press and
jig (1).
(1) Jig
(2) Block
Bearing at Slip Ring Side
1. Lightly secure the rotor (1) with a vise to prevent damage, and
remove the bearing (2) with a puller (3).
(1) Rotor
(2) Bearing
9-S29
ELECTRICAL SYSTEM
(3) Drive End Frame
W1137587
(3) Puller
W1139213