Pto Clutch; Shift Linkage; Structure - Kubota MX5100 Workshop Manual

MX5100, WSM

2. PTO CLUTCH

[1] SHIFT LINKAGE

[2] STRUCTURE

(1) PTO Counter Shaft
(2) PTO Clutch Pack
The hydraulic multiple disk clutch is used for tractor with independent PTO. This PTO is controlled by the clutch
and is independent of the driving system. PTO is "ENGAGED" or "DISENGAGED" by operating the shift lever of the
PTO clutch valve.
(3) 11T Gear Shaft
The shift lever (1) and the PTO clutch valve (4) are
connected by the shift cable (3) as shown in the left
figure.
When the shift lever is moved to the B side, the PTO
clutch valve (4) is set at "ENGAGED" position. Then the
oil flows to clutch pack through the PTO clutch valve (4),
and the clutch pack is engaged and the PTO shaft
rotates. When the shift lever is moved to the A side, the
PTO clutch valve (4) is set at the "DISENGAGED"
position.
(1) Shift Lever
(2) Lever Guide
(3) Shift Cable
(4) PTO Clutch Valve
(4) PTO Drive Shaft
2-M2
CLUTCH
A : "DISENGAGED (OFF)"
Position
B : "ENGAGED (ON)" Position
W10136710
(5) PTO Shaft