Kubota MX5100 Workshop Manual page 252

MX5100, WSM
Disconnecting Wirings 2
1. Remove the seat.
2. Disconnect the 4P rear combination lamp connector (1) and the
hazard lamp leads (2).
3. Disconnect the 2P connectors (3) from the PTO lever neutral
switch.
4. Disconnect the 3P connector (6) from the seat switch (5).
5. Disconnect the 2P connectors (8) from the range shift neutral
switch (7).
(1) 4P Rear Combination Lamp
Connector
(2) Hazard Lamp Lead
(3) 2P Connector
(4) PTO Lever Neutral
3-S34
TRANSMISSION
(5) Seat Switch
(6) 3P Connector
(7) Range Shift Neutral Switch
(8) 2P Connector
(9) Range Shift Lever
W10400300