Recommended Paper; Recommended Paper Sizes And Types - Ricoh MP 402SPF User Manual

Hide thumbs Also See for MP 402SPF:
Table of Contents

Advertisement

Recommended Paper

Recommended Paper Sizes and Types

This section describes recommended paper sizes and types.
• If you use paper that curls, either because it is too dry or too damp, a paper jam may occur.
• Do not use paper designed for inkjet printers, as these may stick to the fusing unit and cause a
misfeed.
• When you load OHP transparencies, check the front and back of the sheets, and place them
correctly, or a misfeed might occur.
Tray 1
Paper type and weight
2
52–162 g/m
(14 lb. Bond–
90 lb. Index)
Thin Paper–Thick Paper 2
2
52–162 g/m
(14 lb. Bond–
90 lb. Index)
Thin Paper–Thick Paper 2
2
52–162 g/m
(14 lb. Bond–
90 lb. Index)
Thin Paper–Thick Paper 2
Paper size
Select the paper size using the
paper size dial on the tray
1
A4 , A5 , A6 , 8
/
× 14 ,
2
1
1
1
8
/
× 11 , 5
/
× 8
/
2
2
Set the paper size dial on the tray to
" ", and select the paper size with
the control panel:
A5 , B5 JIS , B6 JIS , 8
1
1
, 8
/
× 14 , 8
/
× 13 ,
4
4
1
8 × 13 , 8 × 10
/
, 8 × 10 ,
2
1
1
7
/
× 10
/
, 16K , 8
4
2
2
13
/
5
Custom size:
(mainly Europe and
Asia)
Vertical: 148.0–356.0 mm
Horizontal: 100.0–216.0 mm
(mainly North America)
Vertical: 5.83–14.01 inches
Horizontal: 3.94–8.50 inches
Recommended Paper
Paper capacity
500 sheets
*1
:
2
500 sheets
1
/
× 13
2
1
/
×
2
500 sheets
143

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MP 402SPF and is the answer not in the manual?

Questions and answers

ABE
March 17, 2025

how to connect to a computer

1 comments:
Mr. Anderson
March 17, 2025

To connect a Ricoh MP 402SPF to a computer, follow these steps:

1. Network Connection (Using Ethernet)
- Insert one end of the Ethernet cable into the printer’s Ethernet port.
- Insert the other end into the computer or network router.
- Plug the power cord into a wall socket and turn on the printer.
- Wait for the printer to recognize the network connection (this may take up to a minute).

2. Driver Installation (Using a CD-ROM)
- Insert the provided CD-ROM into the computer’s CD drive.
- Open File Explorer and double-click the CD-ROM drive.
- Run "Setup.exe" to start the installation process.
- Follow the on-screen instructions to install the printer driver.

3. Network Quick Install (For Network Setup)
- Open the installer and click [Network Quick Install].
- Accept the software license agreement and click [Next].
- Select the machine model (Ricoh MP 402SPF) from the list.
- Click [Install] to complete the setup.

4. Confirm Computer Information (If Needed for Scanning or Network Setup)
- Open Command Prompt and type `ipconfig/all` to find the computer’s name and IP address.
- Type `set user` to confirm the user name.

After completing these steps, the Ricoh MP 402SPF should be connected and ready for use.

This answer is automatically generated

Table of Contents

Save PDF