Table of Contents
Advertisement
9. Adding Paper and Toner
Printing from the Bypass Tray Using the Printer Function
• If you select [Machine Setting(s)] or [Machine Setting(s): Any Type] in [Bypass Tray] under [Tray
Setting Priority] in [System] of the Printer Features menu, the settings made using the control panel
have priority over the printer driver settings. For details, see "System", Print.
• The default of [Bypass Tray] is [Machine Setting(s): Any Type].
• Settings remain valid until they are changed.
• For details about setting printer drivers, see "Printing Documents", Print.
•
(mainly Europe and Asia) [A4 ] is the default setting for [Printer Bypass Paper Size].
•
(mainly North America) [8
Size].
Specifying regular sizes using the control panel
1.
Press [Home] (
2.
Flick the screen to the left, and then press the [User Tools] icon ( ).
3.
Press [Tray Paper Settings].
4.
Press [Printer Bypass Paper Size].
5.
Select the paper size.
6.
Press [OK].
7.
Press [User Tools] (
8.
Press [Home] (
Specifying a custom size paper using the control panel
1.
Press [Home] (
2.
Flick the screen to the left, and then press the [User Tools] icon ( ).
126
1
/
× 11 ] is the default setting for [Printer Bypass Paper
2
) at the bottom of the screen in the center.
) on the top right of the screen.
) at the bottom of the screen in the center.
) at the bottom of the screen in the center.
- Quick Links:
- Adding Toner
- Disposing of Used Toner
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MP 402SPF and is the answer not in the manual?
Questions and answers
how to connect to a computer
To connect a Ricoh MP 402SPF to a computer, follow these steps:
1. Network Connection (Using Ethernet)
- Insert one end of the Ethernet cable into the printer’s Ethernet port.
- Insert the other end into the computer or network router.
- Plug the power cord into a wall socket and turn on the printer.
- Wait for the printer to recognize the network connection (this may take up to a minute).
2. Driver Installation (Using a CD-ROM)
- Insert the provided CD-ROM into the computer’s CD drive.
- Open File Explorer and double-click the CD-ROM drive.
- Run "Setup.exe" to start the installation process.
- Follow the on-screen instructions to install the printer driver.
3. Network Quick Install (For Network Setup)
- Open the installer and click [Network Quick Install].
- Accept the software license agreement and click [Next].
- Select the machine model (Ricoh MP 402SPF) from the list.
- Click [Install] to complete the setup.
4. Confirm Computer Information (If Needed for Scanning or Network Setup)
- Open Command Prompt and type `ipconfig/all` to find the computer’s name and IP address.
- Type `set user` to confirm the user name.
After completing these steps, the Ricoh MP 402SPF should be connected and ready for use.
This answer is automatically generated