Messages Displayed When You Use The Printer Function; Messages Displayed On The Control Panel When You Use The Printer Function - Ricoh MP 402SPF User Manual

10. Troubleshooting
Messages Displayed When You Use the Printer
Function
This section describes the principal messages that appear on the display panel, error logs or reports. If
other messages appear, follow their instructions.

Messages Displayed on the Control Panel When You Use the Printer Function

• Before turning off the power, see page 62 "Turning On/Off the Power".
Message
"Hardware Problem:
Ethernet"
"Hardware Problem: HDD"
"Hardware Problem: USB"
"Hardware Problem:
Wireless Card"
(A "wireless LAN board" is
referred to as a "wireless
card".)
178
Cause
An error has occurred in the
Ethernet interface.
An error has occurred in the
hard disk.
An error has occurred in the
USB interface.
• The wireless LAN board
has malfunctioned.
• The wireless LAN board
you are using is not
compatible with this
machine.
Solution
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Turn off the power, and then back on
again. If the message appears
again, contact your service
representative.
Turn off the power, and then confirm
the wireless LAN board is inserted
correctly. And then, turn on the
power again. If the message
appears again, contact your service
representative.