Table of Contents
Advertisement
Chapter 5
Sub item
MTR ON
FAN
FAN ON
DRM ROT
E075 RLS
SHUT OFF
Details of IO
No.
1
3
5
7
9
11
13
15
17
19
21
23
25
5-58
FUNCTION > F MISCp
Use it to start a check on the motor.
Press the Stop key to stop the operation.
The kind of check of a motor is specified. It decides by the O.K. key after
inputting a number with a ten key. See the details section.
Use it to start a check on the fan. Press the Stop key to stop the operation.
Use it to cause the drum to rotate idly for 10 min. Press the Stop key to
stop.
Be sure to release the transfer belt before execution.
Use it to clear 'E075'.
After execution, check to make sure that the transfer belt is at the correct
position; then, turn off and then on the power switch.
Use it to check the operation of the auto power off mechanism.
Parts name
not used
Polishing roller solenoid (SL18)
M transfer blade solenoid (SL7M)
K transfer blade solenoid (SL7Bk)
M toner supply clutch (CL2)
Bk toner (upper) supply clutch (CL4)
Fixing web take up solenoid (SL3)
Fixing oil pump drive solenoid (SL2)
SALT sensor shutter (SL17Y, M, C,
Bk)
Cassette 2 pickup roller releasing
solenoid (SL10)
Paper deck pickup roller releasing
solenoid (SL8001)
Paper feed roller solenoid (SL13)
Cassette 2 pickup clutch (CL14)
Description
T-5-45
Details of IO
No.
2
Transfer belt lifter clutch (CL17)
4
Y transfer blade solenoid (SL7Y)
6
C transfer blade solenoid (SL7C)
8
C toner supply clutch (CL1)
10
Y toner supply clutch (CL3)
12
Bk toner (lower) supply clutch (CL5)
14
Fixing web releasing solenoid (SL4)
16
Separation claw releasing solenoid
(SL15)
18
Cassette 1 pickup roller releasing
solenoid (SL9)
20
Multifeeder pickup roller releasing
solenoid (SL5)
22
not used
24
Cassette 1 pickup clutch (CL12)
26
Multifeeder pickup clutch (CL6)
Parts name
Advertisement
Table of Contents
