How To Clean The Salt Sensor - Canon CLC5100 Series Manual

Chapter 1

1.4.7 How to Clean the SALT Sensor

CLC5100 / CLC4000
1)Take off toner accumulated on the second scoop up sheet [1] to a piece of paper.
Exercise caution not to hit the positioning pin located at the rear of the SALT sensor unit because it might be
deformed when being hit.
2)Clean the second scoop up sheet with dry lint free paper or a blower brush.
Exercise caution not to deform the second scoop up sheet.
3)Wipe out toner adhered on the lower mylar [2] with dry lint free paper.
4)Wipe out toner adhered on the surface of the sensor cover [3] and visible portion of the shutter [4] with a blower
brush.
Exercise caution not to deform the shutter, which is fragile.
1-32
[2] [2]
[1]
F-1-10
[1]
[2]
F-1-11
0002-8832