Table of Contents
Advertisement
Sub item
UP STMR
Enters the adjustment value for paper width detection reference
point 2 for cassette 1.
LOW A4R
Enters the adjustment value for paper width detection reference
point 1 for cassette 2.
LOW STMR
Enters the adjustment value for paper width detection reference
point 2 for cassette 2.
MF A4R
Enters the adjustment value for paper width detection reference
point 1 for the multifeeder.
MF A6R
Enters the adjustment value for paper width detection reference
point 2 for the multifeeder.
MF A4
Enters the adjustment value for paper width detection reference
point 3 for the multifeeder.
SGNL C/M/Y
Enters the value of the toner density signal when INIT is executed
as ATR control.
REF C/M/Y
Enters the value of the toner density reference signal when INIT is
executed as ATR control.
SIGG C/M/Y
Enters the value of the gain for the toner density signal during ATR
control (gain used to set SGNL C, SGNL M, and SGNL Y to 818).
SGNL S C/M/Y/K
Use it to enter the value of the SALT signal.
REF S C/M/Y/K
Use it to enter the value of the SALT reference signal.
SGNL D C/M/Y/K
Use it to enter the value of the signal representing the intensity of
light reflected by the photosensitive drum.
SIGG S C/M/Y/K
Use it to enter the value of the gain for the SALT signal.
PT OFST K
Use it to enter the adjustment value of the density pattern for
SALT.
PUDT U/L
Use it to enter the adjustment value for pick up timing adjustment
(P UPTMG).
P TH 1/2
Enters the output characteristics of the paper thickness sensor set
at time of shipment from the factory.
SNSR RNK
Enters the characteristics of the paper thickness sensor to be
installed newly.
Remarks: The values A through E change by toggle operation
FUNCTION > DC CON
Description
Chapter 5
5-49
Advertisement
Table of Contents
