Canon CLC5100 Series Manual page 75

Replacement for All Colors
32) Execute 'STIR 4'. (about 4 min)
33) Execute 'INIT 7'. (about 2 min)
34) Execute 'WINCLR4'.
35) Record the results on the service label.
36) Execute 'ADJUST > PASCAL > PASCAL' to
select '1'.
37) Turn off and on the power switch.
38) Execute 'auto gradation correction' in user mode.
Replacement for C/M/Y
32) Execute 'STIR C/M/Y' as necessary. (about 1
min)
33) Execute 'INIT C/M/Y' as necessary. (about 1 min)
34) Execute 'SINIT C/M/Y' as necessary. (about 1
min)
35) Execute 'WINCLR C, M, or Y'.
36) Select '1' by executing 'ADJUST > PASCAL >
PASCAL'.
37) Record the result on the service label.
38) Turn off and then on the power switch.
39) Execute 'auto
correction)' in user mode.
Replacement for Bk Only
32) Execute 'STIR K'. (about 1 min)
33) Execute 'SINIT K'. (about 1 min)
34) Execute 'WINCLR K'.
35) Record the result on service mode.
36) Select '1' by executing 'ADJSUT > PASCAL >
PASCAL'.
37) Turn off and then on the power switch.
38) Execute 'auto
correction)' in user mode.
gradation correction
gradation correction
(full
(full
Chapter 2
2-23