Canon CLC5100 Series Manual page 167

<FEED ADJ> ADJUST > FEED ADJ
Sub item
UP ADJ
LOW ADJ
MULT ADJ
DECK ADJ
REFE ADJ
MT RG T
COAT ADJ
T-5-24
ADJUST > FEED ADJ
Adjusts the image write start position in main scanning direction when
pick up is from the upper cassette. Be sure to select the upper cassette on
the User screen in advance.
Settings range: 0 to 255 Standard: 128 unit: about 0.06mm
A higher value leads to a movement to the rear.
Adjusts the image write start position in main scanning direction when
pick up is from the lower cassette. Be sure to select the upper cassette on
the User screen in advance.
Settings range: 0 to 255 Standard: 128 unit: about 0.06mm
A higher value leads to a movement to the rear.
Adjusts the image write position in main scanning direction when pick up
is from the multifeeder. Be sure to select the upper cassette on the User
screen in advance.
Settings range: 0 to 255 Standard: 128 unit: about 0.06mm
A higher value leads to a movement to the rear.
Adjusts the image write start position in main scanning direction when
pick up is from the paper deck. Be sure to select the upper cassette on the
User screen in advance.
Settings range: 0 to 255 Standard: 128 unit: about 0.06mm
A higher value leads to a movement to the rear. (only if deck is connected)
Adjusts the image write start position in main scanning direction for re
pick up operation.
Settings range: 0 to 255 Standard: 128 unit: about 0.06mm
A higher value leads to a movement to the rear.
Use it to adjust the image write start position in scanning direction for
heavy paper from the manual feed tray.
Settings range: 20 to 20 Standard: 0 unit: about 0.1mm
An increase in the value will cause a shift toward the trailing edge.
Use it to adjust the image write start position in main scanning direction
for coated paper from the paper deck.
Settings range: 0 to 256 Standard: 128 unit: about 0.06mm
An increase in the value will cause a shift toward the trailing edge.
Description
Chapter 5
5-37