Canon CLC5100 Series Manual page 115

Code
0001 Upper delivery motor (M2)
E512
0001 Lower delivery motor (M3)
Low speed feeding motor (M10; rotation
E516
failure)
E517
0001
The locking cam home position for the buffer
0002
pass unit cannot be detected.
0003
0004
The locking cam home position for the buffer
0005 pass unit cannot be detected.
0006
0007
The locking cam home position for the buffer
0008
pass unit cannot be detected.
0009
0011
The locking cam home position for the buffer
0012
pass unit cannot be detected.
0013
Cause
When upper delivery motor error detect signal is
detected.
When lower delivery motor error detect signal is
detected.
There is no clock signal from the clock sensor (P123) of
the feeding motor for 250 ms or more.
The upper cam solenoid 1 is damaged, the upper cam
sensor 1 is damaged, or the position of the upper cam
sensor light blocking plate is faulty.
The upper cam solenoid 2 is damaged, the upper cam
sensor 2 is damaged, or the position of the upper cam
sensor light blocking plate is faulty.
The upper cam solenoid 1 or 2 is damaged, both upper
cam sensor 1 and 2 are damaged, or the position of the
upper cam sensor light blocking plate is wrong.
Either or both of the upper cam solenoids are damaged,
or the posi tion of the upper cam sensor light blocking
plate is faulty.
The upper cam solenoid or the sensor is damaged.
A serial port communication sensor read attempt has
failed (mis match in echo back).
A serial port communication unit read attempt has failed
(mismatch in echo back).
A serial port communication unit write attempt has failed
(mis match in echo back).
A serial port communication unit write attempt has failed
(mis match in write execution echo back).
The lower cam solenoid 1 is damaged, the lower cam
sensor 1 is damaged, or the position of the lower cam
sensor light blocking plate is faulty.
The lower cam solenoid 2 is damaged, the lower cam
sensor 2 is dam aged, or the position of the lower cam
sensor light blocking plate is faulty.
Either lower cam solenoid 1 or 2 is damaged , both lower
cam sen sors 1 and 2 are damaged, or the position of the
lower cam sensor light blocking plate is faulty.
Description
Chapter 3
3-17