Table of Contents
Advertisement
Chapter 5
Sub item
RT PWR
D RT DSP
JRT PP
PSTCL SW
RT REG
5-76
OPTION > P OPT
A change has been made so that the drum may be rotated idly for 2 min
at time of power on (main switch).
Settings: 0 to 1
Standard: 0
0: OFF; do not execute idle rotation of the drum at power on (default)
1: ON; execute idle oration of the drum for 2 min at power on1 is
recommended
Record any new values on the service data sheet
When [1] is selected in service mode, the following mode will be
indicated in the control panel when user mode is selected.By executing
an appropriate item in user mode, the drum may be caused to make idle
rotation for 2 min. (The machine, however, must be in standby state.)
Setttings range: 0 to 1 Standard: 0
Record any new values on the service data sheet
A change has been made so that the number of sheets after which drum
idle rotation is executed in the middle of making copies for the following
may be changed: extra length thick paper/thickest paper.
Settings range: 0 to 10
0: do not execute
1: every 10 sheets
2: every 30 sheets
3: every 50 sheets (default)
4: every 100 sheets 5: every 300 sheets
6: every 500 sheets 7: every 750 sheets
8: every 1000 sheets 9/10: every 3000 sheets
Record any new values on the service data sheet
In the past, a change was made by the service person at time of
installation; now, the charge is the default)
Settings: 0 to 1 Standard: 1
0: OFF; do not turn off auxiliary charging between sheets
1: ON; turn off auxiliary charging between sheets
Record any new values on the service data sheet
A change has been made so that the drum may be rotated idly after auto
registration.
Settings: 0 to 1 Standard: 1
0: OFF, do not execute drum idle rotation after auto registration
1: ON; execute drum idle rotation for 1 min after auto registration
Record any new values on the service data sheet
Description
Standard: 3
Advertisement
Table of Contents
