Canon CLC5100 Series Manual page 119

Code
The delivery assembly exhaust fan (FM1/2/
0001
3) is faulty.
The general exhaust fan (FM21/22/23) is
0002
faulty.
E807
0001 The laser cooling fan (FM4/5) is faulty.
The laser scanner motor cooling fan (FM24)
0002
is faulty.
The digital unit cooling fan 3 (FM16) is
0003
faulty.
The digital unit cooling fan 1/2 (FM14/15) is
0004
faulty.
E822
Reversing twin fan (FM90002/90003)is
0002
faulty.
The reversing assembly exhaust fan(FM28/
0003
29/30/33)is faulty.
The fixing heat discharge fan(FM31)is
0004
faulty.
The pre fixing exhaust fan (FM35/36)is
0006
faulty.
E824
0001 The primary exhaust fan (FM6) is faulty.
0002 The primary suction fan (FM8/9) is faulty.
E826
0001 The pickup cooling fan (FM26/32) is fault.
E840
The external heat roller drive motor (M9004)
0001
is faulty.
The external heat roller HP sensor 1
0002 (PS9003) or the external heat roller HP
sensor 2 (PS9004) is faulty.
Cause
The delivery assembly exhaust fan (FM1/2/3) has
stopped to rotate.
The general exhaust fan (FM21/22/23) has stopped to
rotate.
The laser cooling fan (FM4/5) has stopped to rotate.
The laser scanner motor cooling fan (FM24) has stopped
to rate.
The digital unit cooling fan 3 (FM16) has stopped to
rotate.
The digital unit cooling fan 1/2 (FM14/15) has stopped to
rotate.
Reversing twin fan (FM90002/90003)has stopped to
rotate.
The reversing assembly exhaust fan(FM28/29/30/33)has
stopped to rotate.
The fixing heat discharge fan(FM31)has stopped to
rotate.
The pre fixing exhaust fan(FM35/36)has stopped to
rotate.
The primary exhaust fan (FM6) has stopped to rotate.
The primary suction fan (FM8/9) has stopped to rotate.
The pickup cooling fan (FM26/32) has stopped to rotate.
When the machine tries to more the roller, there is no
change in the signal from the external the HP sensor 1
(PS9003) after it has started the external heat roller drive
motor (M9004).
The machine detects an unmatch between the readings of
the following: external heat roller HP sensor 1 (PS9003,
software control sensor, outside) and external heat roller
HP sensor 2 (PS9004, hardware error sensor).
Description
Chapter 3
3-21