Option Machine Settings Mode; Option (Machine Settings Mode); Option Table - Canon CLC5100 Series Manual

5.4 OPTION

5.4.1 OPTION Table

5.4.1.1 OPTION Table

CLC5100 / CLC4000
<R OPT> OPTION > R OPT
Sub item
P SIZE
METAL
CONTROL
MANAGE
Machine Settings Mode
OPTION > R OPT
Identifies the size of paper and transparency film of the copier.
Settings: 0: AB configuration 1: Inch configuration
2: A configuration 3: All
Record any new values on the service data sheet.
Determines whether to use or not metal mode in user mode.
Settings: 0: Not available 1: Available Standard: 0
Record any new values on the service data sheet.
Use it to enable copying, printing, and scanning in the absence of the
following input:
control key inserted
card inserted (with Control Card IV/Card Reader B1 connected)
ID number entered (when pre set)
Settings range: 0 to 444
Record any new values on the service data sheet.
(Each digit may be between 0 and 4; if set to '0', conditional operationis
not enabled.)
See the details section.
Use it to bring the hues closer to those of professional printing.
If 'MANAGE' is set to '1', the Pro Print key will be indicated on the user
mode screen.
Settings: 0: Standard 1: Professional printing Standard: 0
T-5-54
Description
Standard: 0
Chapter 5
0004-8857
5-69