Machine Settings Mode ('5') - Canon NP6621 Service Manual

OPERATIONS AND TIMING
G. Machine Settings Mode ('5')
• To start machine settings mode, press '5' (numeric keypad) and then the AE key.
• To select an item, press the appropriate number on the numeric keypad and then the Start key.
• To change the value, enter the new value on the numeric keypad, and press the AE key.
• To deselect the item, press the Clear key.
• A press on the Start key will execute appropriate copying operations.
No.
501 Multifeeder paper width sensor
characteristics registration
502 Copy density notation switch (9-/
17- step)
503 Auto energy saver function deacti-
vation
504 Copy count upper limit set
505 Universal cassette paper size
storage (cassette 1)
506 Separation static eliminator output
voltage switch
507 Fixing forced wait
3–118
Item
See p. 3-131.
9-step:
17-step:
default:
• Entering '1' on the numeric keypad causes the indica-
• Entering '0' on the numeric keypad causes the indica-
settings:
default:
When set to '0', 100 copies.
See p. 3-132.
0:
1:
default:
Activating the item increases the time of initial rotation.
Activate it if the fixing on the first copy is poor because
of a low-temperature environment.
Table 3-614-1
COPYRIGHT © 1998 CANON INC.
Description
0
1
0 (9-step)
tion to change to 'ON', activating the auto energy
saver function.
tion to change to 'OFF, deactivating the function.
default: activated
0 to 99
0
settings: 0 to 14
default: 0
2 kV
4 kV
0
0: deactivated
1: activated
default: 0
CANON NP6621 REV.0 FEB. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)