Marine Settings; Depth Settings - Standard Horizon CP300i Owner's Manual

12.0.8 Marine Settings

To control the display on the chart of the marine features.
Place Names
Names Tags
Nav-Aids & Light Sectors: Turns the presentation of Lights, Signals, Buoys and Beacons On (Nav-Aids & Light
Attention Areas
Tides & Currents
Seabed Type
Ports & Services
Tracks & Routes

12.0.9 Depth Settings

Controls the depth information on the Chart page.
Depth Range Min
Depth Range Max
Page 86
: Turns the local area names On or Off.
: Turns a tag for particular chart objects that either includes the Name of the chart object or
the Depth of an Underwater chart object On or Off.
Sectors are shown), Off (Nav-Aids & Light Sectors are not shown) or No Sector (Nav-Aids
are shown, Light Sectors are hidden).
: Turns the Attention Areas (areas in which special attention by the mariner is required
because of natural or man-made hazards sailing regulations and restrictions) On or Off.
: Turns the Tides and Currents On or Off.
When data/time is available, Tidal stream arrows are shown on the charts, indicating the
direction and strength of the Tide. If no data/time is available from the GPS or the GPS
Chart Plotter is not in Simulation Mode, the icon on the chart is generic one. The color of
the arrow denotes the strength of the current as follows:
When the GPS Chart Plotter receives a valid position fix, the Tide icons are shown on
the charts on the basis of the current date and time: the screen displays and changes
arrows as date/time changes.
: Turns the Seabed Type On or Off.
: Turns the Ports and Service icons On of Off. Areas along the shore with facilities for
mooring, downloading and uploading of ships, generally sheltered from waves and winds.
Port installations are piers, wharves, pontoons, dry docks, cranes....
: Turns the Tracks and Routes On or Off (recommended and established routes for ships at
sea, including traffic separation schemes, deep water routes).
: Sets the minimum depth limit to show Depth Sounding, Bathymetric Lines and Depth Area.
: Sets the max depth limit to show Depth Sounding, Bathymetric Lines and Depth Area.
Figure 12.0.9 - Depth Settings
GPS Chart Plotters