Connecting And Disconnecting The Electrode Belt - ZOLL LifeVest 4000 Patient Manual

Connecting and disconnecting the electrode belt

To connect the belt
WARNING
Do not force the connector. Allow the connector to align before pushing it in.
Forcing the connector may damage it and cause the system to malfunction.
To disconnect the belt
1 Line up the connector with the monitor. The cable should face
toward the center of the monitor.
2 Gently push the connector straight in until it locks in place.
1 Squeeze the sides of the connector as you pull it away from the
monitor.
2 Pull the connector straight out of the monitor.
Assembling and putting on the garment
Page 4-11